Cutting Wheel Set Compatible with Plastic 44pcs for Rotary Tool, HSS Circular Saw Blades 6pcs, Resin Cutting Discs 20pcs, 545 Diamond Cutting Wheels 10psc with 2 Screwdrivers

(10 customer reviews)

$9.99

  • RESIN CUT OFF DISCS – With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting.
  • HSS CIRCULAR SAW BLADES – The cut off saw blades are high speed steel and there are 5 kinds of outer diameters 22/25/32/35/44/50mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc.
  • DIAMOND CUTTING WHEELS – The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass.
  • GREAT TOOL FOR DIY – Compatible with most power rotary tools. The cutting wheel set for rotary tool is suitable for cutting wood, plastic, gem, glass, aluminum alloy and jade. They are a great tool as well as perfect gift for DIY hobbyists.
  • 100% SATISFACTION – If you have any problems, simply contact us and we promise an 100% satisfactory solution. You don’t need to worry about returns and refunds.
Category:

Additional information

Product Dimensions

7.48 x 4.33 x 0.5 inches, 5.11 ounces

Item model number

d36

Date First Available

August 14, 2019

Manufacturer

Kuenuilr

10 reviews for Cutting Wheel Set Compatible with Plastic 44pcs for Rotary Tool, HSS Circular Saw Blades 6pcs, Resin Cutting Discs 20pcs, 545 Diamond Cutting Wheels 10psc with 2 Screwdrivers

  1. Bob

    I bought these as an inexpensive alternative to Dremel attachments. They get the job done, but I’m worried about long term durability. I have only used the metal cutting discs (probably will never use other attachments) to cut some screws. The discs struggled to cut at times, but eventually did the job with a clean cut. I would buy again based upon pricing.

  2. J

    I only bought this for the resin cutting discs (the black ones). I used it to cut through rusted exhaust fasteners where an angle grinder would be too big/unwieldy.

    I used this kit with Harbor Freight’s “1.3 Amp Variable Speed Rotary Tool Kit”.

    To get an idea of what I had to cut through, I cut the following:
    1. Cut straight through steel M10 exhaust studs to lop them off completely. I had to do two of these.
    2. Cut a few sides off of steel M10 nuts so I could remove the nuts from the studs. This is for when the nut is so deformed and dissolved due to rust, that neither a regular nor extractor socket could be used. Just cut off a side or two, the nut’s clamping power will be relieved then the remnants of the nut can be popped off the threads sideways/perpendicular to bolt’s length, with a hammer and chisel. I had to do this with three nuts and these discs.
    3. Cut straight through flat 1/2″ wide stainless steel exhaust clamps holding heat shields on, the nuts and bolts holding the heat shields on were too far gone to get any type of socket on, had to do about six of these.

    I used a single resin disc to cut through all of those. For the price I was expecting rotten quality: discs exploding on me, wearing down really fast, flying off mandrels, etc. Instead I only needed to use one disc for all of it, the mandrel didn’t fail or loosen, by the time I was finished the disc was barely worn and still usable. The performance for the price was great and a nice surprise. I intend to continue using it until that disc fails which is probably not going to be any time soon. Having the ability to cut through metal with such small discs is very handy. Cutting straight through an M10 exhaust stud took about one minute, without applying any pressure either just let the speed do the work, make sure you wear safety squints, gloves and block the sparks if necessary, may want to wear a mask with a particulate filter too, otherwise you can taste the dust lol.

    Everything in the kit comes in a handy vinyl pouch with see through plastic pockets to organize the contents. I put the resin discs in a separate zip bag with a silica gel packet to keep it free of moisture and avoid water or atmospheric humidity from degrading the resin over time, though they’re so small that even if they did come apart mid-cut I doubt they’d do any damage, at least unlike a 4-5 inch angle grinder wheel coming apart at 11000rpm LOL…

  3. BRIAN S.

    This works great for all kinds of DIY projects at home. I have used it a numerous times and it has saved me time and money. I have cut wood, light steel, bolts, plastic with the kit with no problems. It takes a little longer than using a sawzall but I can also get into tight places. It also works great when repairing Xboxes and other electrical components that are not designed to be taken apart to be repaired. I will buy again.

  4. A. D. Neal

    لابأس

  5. SFH7

    Very dangerous in some circumstances! Don’t run at high rpms. Use bigger, heavier, hardened steel, not brass, mandrels. The saw blades have very high risk, use gently. Cheap mandrels like the ones included bend & fly off if pressed or even if not sometimes. Consider making a larger hole for a thicker mandrel. Wear eye, face, etc. protection. Very useful however.

  6. Tim

    I use these cutting wheels for small projects, and they grind and cut very well.

  7. Solieman

    Bought these cutting wheels to do little jobs here and there. So far, I’ve tried all these wheels on Dremmel to cut wood, metal and plastic, they worked fine. Might try on glass project at a later time.

  8. Johnny Hidalgo

    Excellent quality for the price. Very durable, I used one of the metal cutting wheels to cut off ends of thick screws protruding from wall and then checked to see how much the wheel had been reduced in size from the cutting and it looked like it hadn’t shrunk at all. I’ve used these to cut metal and plastic and they work great. Nice assortment of cutters for a variety of jobs. Easy to install on a dremel rotary tool and cuts smooth. Wheels are well balanced and keep their shape through multiple cuts. Highly recommend.

  9. Shana Kroulek

    These discs are strong and I just love them! They’re great for my projects! I share them with my dad. They go on easy and they’re nice and sharp. I like the variety of blades. They work great with my rotory tool and I haven’t had any issues with them.

  10. Johnny Hidalgo

    The graphite, metal cutting wheels in this set fit my small, cheap hardell rotary tool. They allow me to cut metal props and stripped hex screws for my rc trail trucks and rock crawlers. I was literally stuck without them. P.S. if your screws strip, cut a flathead in the top of them and flathead them out. works everytime!!! ALWAYS WEAR EYE PROTECTION!!

Add a review

Your email address will not be published. Required fields are marked *