Additional information
| Manufacturer | LingyueAuto |
|---|---|
| Brand | EKR |
| Model | CAMRY full set custom leatherette car seat cover |
| Item Weight | 19.46 pounds |
| Package Dimensions | 27 x 20 x 8 inches |
| Manufacturer Part Number | lingyue061 |
EKR Custom Fit Carmy Car Seat Covers for Select Toyota Camry L LE XLE 2012 2013 2014 2015 2016 2017 (Not for Hybrid) – Full Set,Leather (Black with Red Trim)
$229.99
- 4-layer Construction w/ foam padding and protective polyester shell; Leather layer Offers high durability,great breathability,water resistance and ease to clean
- Stitching designed to emulate factory seat style and the high quality buckles and zippers enable for a secure fit
- Tailor-made to the exact specifications of your vehicles seats and protects your seats from spills, stains, and damage
- Designed to install yourself (installation may require some effort for a snug fit) and includes a 2 year limited warranty against defects
- 100% Brand New : Outback custom seat cover includes front and rear seat covers ,headrest covers and airbag cutouts
9 reviews for EKR Custom Fit Carmy Car Seat Covers for Select Toyota Camry L LE XLE 2012 2013 2014 2015 2016 2017 (Not for Hybrid) – Full Set,Leather (Black with Red Trim)
Related products
-
Power Stop K7136-36 Front and Rear Z36 Truck & Tow Brake Kit, Carbon-Fiber Ceramic Pads and Drilled and Slotted Brake Rotors For 2021-2023 Durango | 2016-2022 Grand Cherokee…
$622.62 -
Freightliner Genuine Electronic Dump Auto Valve – A16-18694-000
$544.85 -
Parts 24262817 Automatic Transmission Torque Converter
$538.34
Holly Broderick –
Seat covers fit very well and they look beautiful
Amazon Customer –
Ordered these for my 2021 SE Camry nightshade. Took 4 hours. had to remove back seats and sides to the uppers of the back seats. This install is for mechanically inclined people for sure – takes a little strength too. Great you tube video of some young asian chaps who represent this product. P.S…..you’ll have to kiss goodbye your rear seat middle armrest – the seat covers dont allow it to foldown like it did when you bought it! Good quality and great fit – just takes a lotta sweat to install.
Bobbybeb –
been having for a couple years the quality is great only custom covers ive found that cover completely over entire seats easy to install with tucking tool has velcro and straps for tightening look good and oem style cant even tell they are covers would buy again!
Michelle Castellanos –
It is very easy to install. Looks great, so happy.
But the only thing is I’m from Australia, so the wheel is on the right, so the cover at the front does not fit exactly.
Amazon Customer –
I purchased this seat cover and the quality of the construction for the price was very good. Despite purchasing this two years ago, the seats have held up very well and barely show any sign of wear and tear even though I’ve been pretty rough with it. Unfortunately, the seat covers did not install very easily, but customer service was incredibly helpful and was responsive and empathetic about my specific situation. This seat cover will 100% protect your OEM seats, while also maintaining a luxurious look and feel. Personally, I don’t even want to take these off my seats since they are just better than my original Camry seats. Worth the money!
JA –
The seat covers do not fit as advertised and they were returned. These seat covers will take hours to install. The front seat covers and headrest fit very well. The center console cover does not come close to fitting. The rear seats are the problem. The rear seat covers do not come with breakable fabric so the rear side airbags may not deploy properly. To install, you will have remove the rear seat and back side cushions, which have the airbags and you will have to disconnect the wiring harness to both airbags to install easily. Once installed, the bottom seat cushion is hard to reinstall into the vehicle. The bottom cover was tight and centered and the fabric was still lifting up when you get in and out. The covers for the back seat were so thick, it made it extremely hard to center and put the seat back up. The side cushions were extremely hard to reinstall. The finished install, the front seats looked good but the back seats looked terrible. The covers were bigger than the seats and the head rest area was sloppy.
Doni G –
Wow, fit perfect. I recommend putting the lower back seat a little looser than you think in order for the baby seat latch to properly clear and enter the holes. It shouldn’t be too hard to put in, no jamming or mashing is needed. Also make sure to flip both rear buckles forward, in order for those to make it into the passages in the seat. That was the hardest part. The front seats are easy to partially release without removing ‘that’ wire retention clip, just slip your finger around and unhook the foot protector lashing, I got the straps just fine without removing ‘that’ wire clip. Overall, amazing amazing fit, and great quality. Some of the rubber piping is uneven, but you wouldn’t notice that unless you were looking for it, and it’s not throughout, I think just one of my front seats was slightly noticeable, don’t “not buy this” because of that though!
Holly Broderick –
I purchased this seat cover a year ago. It is still in good condition, fits appropriately, and is not stretched out. You have to install this seat cover properly, not the lazy way, but take your time and follow the instructions and video provided. I did have a coffee spill on the passenger side, and the cover did protect my seats. Although I had to remove it and put it through the washer and dryer twice, it was still in good condition. I regularly clean the seat covers with all-in-one leather cleaner, and the windows are tinted ceramic, so it protects the seats from UV damage. Overall, if you take your time installing and caring for it, it will keep your seats in condition and maintain their value.
waynetn –
I bought the 2018 Camry XLE , non-hybrid covers. These are nice seat covers. They look durable but only time will tell. The instructions are somewhat helpful but their video is not comprehensive, omitting many key steps. I had to watch other videos to do certain steps; for example removing the back seat cushion that you sit on. This step requires a crow bar, or similar tool to pry up the seat using a lot of force.
The most difficult step was putting the bolsters (back seat) back into place. It was very tight reinstalling it and requires placing the hook in the opening on the top side first. Not difficult but then squeezing the bolster back in place was frustrating.
The other difficulty was having to unbolt one of the seatbelt anchors, remove the seatbelt and removing it through the hole in the rear seat base and reinstalling the anchor. Instructions do not mention this.
The fit for the most part was excellent but it was slightly loose (too big) on some seats.
It took me about 5 hours to install both front and back covers.