Additional information
Brand | Rough Country |
---|---|
Style | Hard Low Profile |
Exterior Finish | Textured Black Powder Coat |
Material | Aluminum |
Lock Type | Tailgate |
Vehicle Fitment Note | ONLY fits models with 5'10" bed. |
Manufacturer | Rough Country |
UPC | 840269944246 |
Model | Rough Country Low Profile Bed Cover for 2019-2024 Chevy Silverado 1500/GMC Sierra 1500, 5'10" – 47120580B |
Item Weight | 61.9 pounds |
Product Dimensions | 70 x 33 x 6 inches |
Country of Origin | China |
Item model number | 47120580B |
Manufacturer Part Number | 47120580B |
Position | Rear |
Construction | Drilling Required: No |
Rob –
Very happy ,great price easy to install ,well made 🙂 less then an hour to install .
Danny B –
So I bought both variations of this cover, the 3/4 bed first then full bed access versions. I was not impressed with either. The 3/4 bed access cover for 100$ less is listed as fitting 2019-2024 model 1500 GMC Sierra with Multi-Flex tailgate. It did not cover even 1/6″ inch of the tailgate, it was at least 1/2″ shorter than the full bed access which is 100$ more and that one covered at least a 1/2-3/4 inch of the tailgate.
Now both were relatively easy to install BUT ease of install is not the issue, there are a few issues I want to point out.
1. Both covers leak BADLY. The 3/4 bed access cover did not leak as bad as the full bed access cover due to the mount at the front of the bed being an actual simple and decent design. The full bed access version leaked HORRIBLY. (See Photo) I filled up a cup with 16oz of water and it all drained into the bed.
2. Leak on full bed access is due to a terrible design to where the mounting screw for thew front end of the tailgate IS IN THE DRAIN CHANNEL! (See photo). They need a complete re-design of that screw mount placement to be OFF of the drain channel and not IN it.
3. The left side on the end of the tailgate was not flush to the frame due to the Multi-Flex tailgate bar (see photo) mount located in the truck bed (See Photo at least2-3MM). That can cause water to seep in from that end AND the locking bar was very tight on the left and I had to push pretty hard to get it to lock in place.
4. The drain plug design on the 3/4 bed access is plastic tap to fit and feels cheap.
5. The drain plug on the full bed access version is a much better METAL slip on hose mount.
They seem well built but they are made cheaply at the same time, hence the 600-500$ less than higher quality Hard Tri-fold covers.
I gave them 2 chances and both times they failed to meet my expectations so I am done with rough country.
Matt Grimme –
This product was easy to install, only suggestion is adding an overall diagram for the location of all the latching mechanism. Other than that the bed cover is great and keeps all my items dry on the inside.
Dave –
24 Silverado RST 6”7 bed
Just received my hard trifold 6”7 bed cover the other day and was able to install it yesterday. Great sturdy cover that was well packaged in box. Install went very smooth I was able to install start to finish in under an hour.
My biggest concern was the interior of my bed getting wet with these covers but RC seemed to have covered every angle of that. Rubber seals good, mounts tight and flush to bed rails, and once the cover itself was on it looks great!
Not that it was an issue but id like to mention there will be about a 1/2” gap between the front of the side rails and the front seal across the bed, they send you more than enough of the weather strip to be able to seal these 2 front corner areas with no problem.
All in all it was a great purchase and I’d recommend it to anyone!
Dave –
Bed cover arrived on time in very sturdy packaging. easy to unpack and assemble. fun garage project.very secure. very sturdy.
Karen Pavone –
I like the roll up function of this bed cover compared to the foldable ones I have had in the past. It makes opening and closing super convenient. I find the cover to be plenty sturdy, but I probably wouldnt put something over 40 pounds on it. It also doesnt appear to be water tight as water gets in when running my truck through a car wash. Not sure how it would hold up to regular rain.
Rob –
Fits clean and smooth on 2024 Sierra with multi-pro tailgate. Seems water tight so far. Simple install once I watched the video. I have to pull on the tailgate a bit when opening, as the back edge sits tight, but I’d rather that over a gap. I never use the auto open anyway.
Amazon Customer –
Only real bad thing is, you only get 2 flips. So it’s technically not a “Tri fold” but for what I use it for, it works good. However, it is far from waterproof. All 4 corners leak water. I made sure everything was installed as per the directions. Still leaks on the corners.